FIKO  Electron-beam metallurgical plant

 


Markets of Fiko Ltd

Histori

Titanium Grades

Titanium tubes:

Forged, rolled, seamless, welded, extruded.

Titanium Sheets

 Titanium plates for heat exchangers

 

Titanium Bars and Wire

Titanium Ingots, bars Ti 5V

Titanium ingots Grade-1/ Grade-2

Titanium ingots Ti6Al-4V

Titanium slabs

 


Commonwealth of Independent States titanium manufacturers
 
1)      Titanium sponge
 
a) Zaporozhskij titano-magnievyj kombinat (ZTMK)
b) Berezniki TMK (BTMK)
c) «Ust-Kamenogorsk Titanium Magnesium Combine» joint-stock company
 
2)      Titanium ingots
 
a) VSMPO, Verkhnyaya Salda, Russia
b) Fiko electron beam metallurgical plant, Kiev, Ukraine. Titanium ingots dia. 630-800mm, including titanium ingots Ti6Al/4V and unalloyed titanium ingots.
 
3)      Titanium dioxide
 
a) Public Joint-Stock Company “Titan”, Crimea, Ukraine.
b) Public Joint-Stock Company “Sumykhimprom”
 
4)      Titanium bars
 
a) VSMPO, Russia produce following titanium bars:
-         CP titanium bars
-         Alloyed titanium bars
-         Hot rolled titanium bars
-         Forged titanium bars
-         Turned titanium bars
b) “FIKO” Ltd, Kiev, Ukraine supply titanium bars from warehouse and manufacture of titanium bars including alloyed titanium bars and CP titanium bars. We provide trial lot is one CP titanium bar and alloyed titanium one also we can cut a sample of titanium bar for titanium disks and flanges.
c) Public Joint-Stock Company “Sumy Frunze NPO» manufacture of titanium bars on a give-and-take basis. Public Joint-Stock Company “Sumy Frunze NPO”  produce titanium billets on a give-and-take basis.
 
5)      Titanium tubes
 
a) VSMPO, Verkhnyaya Salda, Russia
b) “Fiko” Ltd, Ukraine, supply titanium tubes:
-         seamless titanium tubes
-         welded titanium tubes
-         CP titanium tubes
-         Alloyed titanium tubes
 
6) Titanium disks and flanges
 
a)      VSMPO, Verkhnyaya Salda, Russia
b)      “Fiko” Ltd
 
7) Titanium sheets and plates
 
a)      VSMPO, Verkhnyaya Salda, Russia
b)      “FIKO” Ltd supply titanium sheets and plates from warehouse and also take the orders for manufacture. As  against VSMPO  Fiko Ltd hand over titanium sheets and plates in small quantities.
 
8) Titanium heatexchangers
 
a)      VSMPO
b)      Public Joint-Stock Company “Sumy Frunze NPO»
c)      “FIKO” Ltd
 
9) Titanium tanks and titanium facilities
 
a) VSMPO
b) Public Joint-Stock Company “Sumy Frunze NPO»
c) “FIKO” Ltd
 
 

Markets of Fiko Ltd

 

Moreover we take orders for supply of following non-ferrous metal:

 

copper tube copper sheets copper plates copper bars copper wire copper ingots

 

aluminium tubes aluminium sheets aluminium tubes aluminium bars aluminium plates aluminium wire aluminium ingots

bronze sheets bronze plates bronze bars bronze tubes bronze wire bronze ingots

 

brass bars brass tubes brass sheets brass plates  brass wire brass tubes brass ingots

 

zirconium ingots zirconium sheets zirconium plates zirconium bars zirconium tubes zirconium wire

 

zinc ingots zinc sheets zinc plates zinc bars zinc tubes zinc wire

 

tin ingots tin sheets tin plates tin bars  tin tubes tin wire

 

tantalum ingots tantalum sheets tantalum plates tantalum bars tantalum tubes tantalum wire

 

The availability of titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, titanium ingots and titanium slabs you can see by clicking on  http://www.titanium-fiko.com.ua/pages/e_page1.htm

 

FIKO Electron-beam metallurgical plant supplies following titanium materials such as: 

1. Titanium bars

a) hot rolled titanium bars/ titanium ring

b) forged titanium bars/ titanium forging

c) turned titanium bars

d) titanium bars VT1-0 and titanium alloys bars

   

2. Titanium tubes

a/ seamless titanium tubes

b/ welded titanium tubes

c/ rerolling titanium tubes

d/ capillar titanium tubes 

e) thick-walled titanium tubes

f) other titanium tubes

 

3. titanium sheets and billets from titanium sheets

4. titanium plates and billets from titanium plates

5. titanium wire

6. titanium ingots

7. titanium slabs

to any country of the world where there is no U.N.O. prohibitions.

 

The whole range of titanium materials kindly see at our web site

http://www.titanium-fiko.com.ua/pages/page1.htm

 

PAYMENT TERMS- prepayment, letter of credit, bank guarantee or under an agreement of parts another payment terms depending on purchase quantity of titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, titanium ingots and titanium slabs .

Orders for manufacture of titanium materials we realize according to following specification:  

ASTM GRADE 1.2.3.4.5.9 and Ti6Al/4V

1.titanium bars

2.titanium tubes including seamless titanium tubes, welded titanium tubes, rerolling titanium tubes, capillar titanium tubes, thick-walled titanium tubes and other titanium tubes

3.titanium sheets and billets from titanium sheets

4.titanium plates and billets from titanium plates

5.titanium wire

6.titanium ingots

7.titanium slabs

 

GOST commercially pure titanium and titanium alloys including:

1.titanium bars

2.titanium tubes including seamless titanium tubes, welded titanium tubes, rerolling titanium tubes, capillar titanium tubes, thick-walled titanium tubes

3.titanium sheets and billets from titanium tubes

4.titanium plates and billets from titanium plates

5.titanium wire

6.titanium ingots

7.titanium slabs

 

We arrange delivery by sea, container, truck and air including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs.

 

We arrange the delivery of mini lot or samples of titanium materials by courier post including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs.

 

We arrange the delivery over Ukraine through carriers who transport less-than-car load including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs.

 

In case customer has its own carrier so Fiko Ltd arrange the delivery of  titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs by FCA Kiev.

 

If you have accomplished payment for titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and also titanium ingots and slabs you can inform us by telephone about it and desirable date of getting of paid titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and also titanium ingots and slabs.

 

 

After payment Fiko Ltd realizes following:

 

A/ preparation for shipment of paid titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs from stock

 

B/ issue of shipping documents for titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs

 

C/ issue certificates of quality for paid titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs

 

D/ issue tax return for paid titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs

E/ In case titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs are going to be  supplied beyond the bounds of Ukraine then Fiko ltd arranges preparation of export documents for titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs

on Ukrainian Customs request.

 

F/Special export. If it is necessary to get permission from Service for Export Control for titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs so after the signing of contract for delivery of titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs Fiko ltd get such permission.

If titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs are dual use goods then customer have to give us a letter of guarantee in which he will indicate that the bought titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs will not be reexported to the third country.

 

G/   In case titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire and also titanium ingots and slabs are supplied outside of Ukraine so for such titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire and also titanium ingots and slabs it is necessary to give conclusion about chemical composition to Ukrainian Customs  for such titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire and also titanium ingots and slabs

 

H/ In case titanium ingots and titanium slabs are supplied beyond the bounds of Ukraine are melted from titanium scrap so it is issued export certificate of strict accounts.

 

SPECIAL OFFER  for Ukrainian and Commonwealth of Independent States enterprises by supply of titanium materials.

1.     FIKO Electron-beam metallurgical plant are ready to realize the exchange of titanium materials http://www.titanium-fiko.com.ua/pages/page1.htm  for enterprises of Ukraine and Commonwealth of Independent States, which Fiko ltd exchange on titanium materials of enterprises or Ukrainian state reserve including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs based on a contract.

2.     Fiko ltd buy directly without agents titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs from enterprises.

3.     Buy titanium equipment for cutting into titanium scrap.

4.     Manufacture titanium disks from titanium bars, titanium sheets and titanium plates for you.

5.      Manufacture titanium flanges from titanium bars, titanium sheets and titanium plates.

6.      Manufacture titanium billet from titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates, titanium wire, and titanium ingots, titanium slabs.

7.     Manufacture titanium heat exchangers from titanium materials including titanium bars, titanium tubes, titanium sheets, titanium plates and titanium wire.

 You can go to home page of our web site and familiar with the whole our Fiko ltd information including stock  of titanium materials.

http://www.titanium-fiko.com.ua 

 

Ukrainian manufacturers of titanium ingots and titanium bars

occupy CIS titanium markets and other countries markets formerly influenced by VSMPO.

 

At the times of Soviet Union and military-industrial system VSMPO was the world largest enterprise producing titanium rolled materials and almost monopolized all titanium supplies.

 

Formerly in Soviet Union only VSMPO produced

-         titanium ingots

-         titanium bars

-         titanium sheets

-         titanium plates

-         titanium wire

-         titanium thick-wall tubes

 

In case any plant needed titanium bars or titanium tubes for own application this plant should have a special order for supply. That is why most of government companies tried to have own titanium stock of

-         titanium ingots

-         titanium bars

-         titanium sheets

-         titanium plates

-         titanium wire

-         titanium tubes

 

and usually enquired for more materials that actually needed.

This led to considerable stockpiling of titanium materials – titanium bars, titanium tubes, titanium sheets and plates, titanium wire.

Furthermore, the government forwarded titanium materials partially to government reserve, whence these materials came into the market at the prices much lower than the self-cost of production. Therefore, VSMPO could not stand such competition and could not sell titanium products at lower prices.

 

As soon as market relations approached, the non-state capital broke the sole right of VSMPO for titanium materials supplies. The newspapers were full of different ads and trade leads offering sale of titanium bars, titanium sheets, titanium tubes and wire. On one side it caused the break-up of governmental planned supplies; on the other side VSMPO couldn’t take orders from small companies and therefore had to reduce production of titanium ingots, which inevitably led to the reduction of titanium bars, titanium tubes, titanium sheets and plates, titanium wire manufacture.

That is the main reason for appearance of alternative source of titanium ingots and rolled materials in Ukraine.

 

In the E.O. Paton Electric Welding Institute academician Tikhanovsky researched the problem of titanium ingots production. In 1993, JSC “FIKO” bought his company and starting from 1993 titanium ingots were melted at FIKO’s plant. FIKO team together with academician Tikhanovsky developed the following technologies of titanium ingots melting:

-         melting of titanium ingots from titanium sponge by electron-beam method

-         melting of titanium ingots from titanium scrap and sponge by EB method

-         melting of titanium ingots from titanium sponge by EB method

-         melting of titanium ingots from titanium scrap, sponge and titanium cuttings (turnings) by EB method

-         melting of titanium ingots from titanium scrap with ligature supplement by EB method

 

FIKO creates own design bureau to construct the equipment for production of titanium ingots.

The ingots were mostly melted from Grade 2 and VT1-0 materials. However, VT1-0 was more preferable as the scrap price was lower than of sponge. The technology of preparation of titanium scrap for melting was under special attention, since titanium scrap quality influences greatly the quality of the melted ingot.

 

Formerly, FIKO used to buy worked out equipment for scrap to produce titanium ingots. Later on, as the manufacture grew stronger in Ukraine, the private companies began to supply titanium scrap.

FIKO then produced titanium ingots dia 400mm weighting 700kg to 1100kg. Because of Al content 0.7% in the chemical composition of VT1-0 ingots, this material was not required among customers of Western Europe and USA. But VT1-0 ingots could be supplied to Asian market.

 

In 1996 – 1997 FIKO melted alloyed titanium ingots. Further, after melting equipment modernization we started to melt ingots dia 630mm with the weight around 3200kg.

At the same time, FIKO tried to establish manufacture of titanium rolled materials in Ukraine:

-         titanium bars and titanium ingots on JSC Sumy Frunze NPO maching-building plant

and Zaporozhye Steel Mill Dneprospetsstal

-         titanium tubes on Nikopol tube plant

-         titanium sheets and plates on Alchevsk metallurgical plant

The cooperation with other Ukrainian industrial enterprises allowed us to offer our customers not only titanium ingots produced at our plant but also titanium rolled materials that was made from our ingots by our partners:

-         titanium ingots

-         titanium bars

-         titanium sheets

-         titanium plates

-         titanium wire

-         titanium tubes

 

From our titanium ingots JSC Sumy Frunze NPO manufactured titanium forged bars and titanium hot-rolled bars with dia over 80mm.

JSC Sumy Frunze NPO except producing titanium bars from FIKO’s titanium ingots, also purchased our titanium rolled materials such as titanium bars and titanium tubes for own manufactured titanium heat exchangers, other titanium equipment for chemical and petrochemical industry.

One of our cooperation sectors with JSC Sumy Frunze NPO was joint participation in tenders for supply of titanium bars and tubes.

Among first such contracts was supply of titanium tubes to Soda plant in Bulgaria. FIKO ltd supplied to JSC Sumy Frunze NPO titanium ingots, from which titanium forged bars were made and further worked into titanium tube billet. After that, the tubes were produced from tube billets at Nikopol tube plant.

 

In 1993-1998 FIKO supplied titanium centrifuges for sugar plants. That provides an opportunity to arrange supply of gas and petrochemical products for production of sugar based on the exchange for titanium ingots, titanium bars, titanium sheets and plates, titanium tubes.

 

With Nikopol tube plant, we worked by the same scheme – supplied titanium ingots for production of:

-         titanium forged bars from titanium ingots

-         titanium rolled bars from titanium ingots

-         titanium tubes for re-rolling from titanium ingots

-         titanium tubes with wall thickness from 0.5mm

-         titanium tubes from titanium ingots on give-and-take basis

 

Titanium sheets and titanium plates were produced in collaboration with Alchevsk metallurgical plant from titanium ingots of FIKO Ltd.

Thus, there was an alternative source of titanium bars and titanium tubes except VSMPO materials.

At that time the financial system of Soviet Union collapsed and numerous industrial companies had to sell their stock of titanium materials at extremely low prices, lower than the prices of VSMPO.

And FIKO had an opportunity to supply titanium sheets, bars, wire and tubes through Moscow companies to Norilsk Nikel, one of VSMPO former customer.

 

In addition, the companies did not purchased large quantities of titanium any more, so it was a good chance to stock the materials and sell them in retail by small lots.

And FIKO Ltd set up own stock with the wide range of titanium materials:

-         titanium ingots

-         titanium forged bars

-         titanium hot rolled bars

-         titanium turned bars

-         titanium alloyed bars

-         titanium sheets

-         titanium plates

-         titanium wire

-         titanium seamless tubes

-         titanium welded tubes

 

The variety of materials on our stock allows us to supply our titanium worldwide.

 

The availability and other information about products on stock you may find on the other pages of this site

 

In case you take interest in Christianity, we would like to invite you to visit our Christian page

at http://www.titanium-fiko.com.ua/pages/page_O.htm

 

LET GOD BLESS YOU.

 

If you want to know why and how The Lord sends his blessings then visit this page of our web site http://www.titanium-fiko.com.ua/pages/page_O.htm.

 

 

   

“God be praised! I got out of poverty. God gave me good (as for Ukrainians) salary, God gave me possibility to receive 300 UAH in bank every month. I can easily go in for sport, be engaged in favorite occupation – studying literature, trying to write my own works,” I thought so two years ago. But no… Stepfather was fired because of drunkenness.  Having considered himself as pensioner he decided not to work anymore and he let himself to live for his wife’s money ( my mother). What should she do? Husband is not a dog. She can’t ask him to go away. But it is not the end… Wife and husband… Let them to find out who feeds... It is not my affair… But once when I was going to have dinner my stepfather stood up and took my plate away. After that case I tried to leave home for a whole day and no to eat. If you imitate your stepmother who obliged you and your brothers and sisters to work much about the house in the village and reproached you, orphans, then God is your judge. I can live without dinner. Nobody dies because of it.

If I had no this terrible diagnosis – cerebral palsy of average difficulty(average because I am not bed) I would have gone away  a long time ago and having earned some money I would rent a room. But I can’t live without somebody’s assistance. That’s why I have to live  in two-room flat with my mother, stepfather and my younger brother. There are public hostels in our country. In theory I could live there. But how is it in practice? In spite of food, clothes, bed that invalids have there many of them ruined themselves by drinking. Having lost all ties with relatives and being alone with their trouble they understand that they have no way back to society of normal and healthy people. That’s why I never hurry to use this guaranteed by our state minimum. Freedom was always dearly for me. And I thought right. Once Viktor Fedorov who is a director of titanium plant producing titanium bars, titanium sheets, titanium ingots and titanium tubes having learned in church Philadelphia that I almost live in the streets said me:

“I know that you can use computer. Would you like to try to make in my office that your hand can do?”

“Why not? Would King David sin if he didn’t loaf?”

So I am here, at titanium mill.

As I didn’t work before I have no enough job experience. Sometimes I have my doubts how to act.

But I am optimist. Experience is acquired. I hope in future to find my “niche”. People will get used to me because there are only kind and honest people working there.  Taking care about production they also worry about partners’ interests producing and supplying production of high quality.

So in engineering department my colleague Sergey Konstantinovich accepts orders for titanium production available at our stock:

Titanium ingots: Grade 1, Grade 2, Ti6Al-4V, 5V

Titanium slabs: Grade 1, Grade 2, Ti6Al-4V, VT 1-0, OT 4

Titanium hot rolled bars: Dia. 10-330 mm of different grades

Titanium cold rolled bars: Dia. 10-330 mm of different grades

Titanium forged bars: Dia. 60-330 mm of different grades

Titanium 5V forged bars: Dia. 510 mm

Titanium turned  bars: Dia. 60-510 mm

 

Titanium sheets: Thickness 0.5-10 mm of different alloys

Titanium plates: Thickness 11-80 mm, VT 1-0, VT6, OT4, VT20, VT14, SP-3V

Titanium seamless and welded  tubes: We take orders for production

Titanium wire: titanium welding wire 1-6 mm in coils

Titanium tanks: We take orders for production according to customer’s drawings.

Electron-beam metallurgy plant FIKO takes orders for production of:

      Titanium bars including hot rolled bars, cold rolled bars, forged bars, turned  bars;

      Titanium sheets 0.5-10 mm;

      Titanium plates 11-100 mm;

      Titanium seamless and welded  tubes;

      Titanium wire;

      Titanium ingots;

      Titanium slabs;

      Titanium production: titanium rings, titanium flanges, titanium discs, titanium heat-exchangers, titanium tanks according to customers’ drawings;

     Titanium billets for casting and stamping.

 

Our special proposal is equipment for chemical industries and others made of titanium and stainless steel, i.e. titanium heat exchangers, titanium tanks.

Not long ago we had a telephone conversation with Konstantin, a young man in wheelchair.

‘We want to order wheelchair using titanium production – titanium bars, titanium tubes, titanium sheets and wire,” he said. He knows well that wheelchairs made in Kiev Artema Plant are good for movement only in flat. When you leave your flat wheel forks are bended. That’s why coming back home invalid( father or mother) has to repair this source of movement for people with limited physical abilities.

Head of commercial department of titanium plant answered: “Ok! We are ready to sign contract for cooperation.” Invalid wheelchairs made of titanium tubes will be lighter in weight than of steel because weight of titanium tube is calculated by formulas:

Diameter = R2 x 0.01413 x Length

Weight = (Diameter – Wall Thickness)x Wall Thickness x 0.01413.

So he can have light and mobile wheelchair. Invalid doesn’t need excess weight.

What material is our active wheelchair made of?

Based on our researches we came to a conclusion that our wheelchairs will be made exceptionally of titanium. Why? There are a few main reasons.

Titanium is very light metal. Minimal weight of wheelchair is very important for invalid because it gives him more mobility in movement.

Titanium is very strong material. It gives an opportunity to use wheelchair more actively, to go in for sports and not to be afraid to break it.

Titanium doesn’t rust and it prolong live circle of invalid wheelchair. That’s why our wheelchairs Flaer 19 are made only of titanium.

Of course all units are also of titanium. Titanium is welded hardly but we resolved problem of strong bonding with special equipment.

Below there are photos showing excellent quality of wheelchair unit welding.

 

Wheelchair frame

Frame of Flaer 19 wheelchair is very complex and accurate construction that allows to tale impact and torsional load. Assembling accuracy of frame is provided  with a stock

 and fixing parts made in precision equipment.

Such technology provides frame assembling of high precision. Frame is projected in such way to spread body weight along all length of frame.

It provides maximum comfort while wheeling and allows to reduce sciatic bone load.

Well known companies producing wheelchairs Invacare and RGK start applying this decision. Moreover RGK carried out research of such frame and showed that such frame spreads sciatic bone pressure.

Wheelchair frame Flaer 19 has straight part with purpose:

-        to make easier getting into wheelchair from floor and to get on floor;

-        to make easier some procedures in toilet;

-        to decrease the dimensions of wheelchair in height that is very important in transportation;

-        to relieve leg pressure under knees ( it’s necessary for some traumas, because leg pressure makes difficult circulation of the blood in knees.

These decisions avoid bedsores especially in early period of rehabilitation.

Leg position is regulated by front tubes of wheelchair.

 It’s very important for girls wearing skirts. Having such wheelchair they easily can wear mini-skirts. Position of legs is set particularly when manufacturing wheelchair.

 

Back

Nobody except the main designer of invalid wheelchair who is invalid(backbone fracture) knows better what invalid wheelchair should be. Below there is interview with our designer Konstantin about wheelchair.

“Many invalids having active mode of life face with problem that wheelchair back disturbs. Traditional back also disturbed me. As many others I cut it off. As a result I’ve got disc prolapsus lower fracture level. I had to reconstruct wheelchair back.”

But we solved this problem. Back remains high. As high as it’s necessary depending on level of backbone damage. And it became narrow. And now revolving on its axis it does not touch anything.

It was the first variant of our wheelchair back.

“Everything was wonderful. In kitchen mobility was increased. It was easily to take pan. You don’t have to be afraid of catching on something. In sport gym you feel very well. The range of motions was increased too much.”

Back problem seemed to be resolved. But no! Friends didn’t like back view. Back has changed its view.

Such back perfectly performs its duties. It supports back, reduces muscle pain and does not prevent turn of body.

After complex of durable tests of our wheelchair all testers came to conclusion that wheelchair completely meets requirements of invalids, it is easy in use, has modern design and instill confidence.

When Konstantin has received made in Kiev titanium plant invalid wheelchair, having individual design he came to office FIKO to show Sergey invalid wheelchair made of titanium, namely titanium wire.

Happy invalid having received ability to move by himself with wheelchair asked Sergey Konstantinovich  to release him 1 item of each titanium rolled material, that is titanium bar, titanium sheet, titanium wire, titanium tube.

Sergey Konstantinovich   agreed. Of course! In Ukraine there is market economy. You must pay high salary if you want to keep a good specialist. He (employee) comes to work, works his shift and goes home in the evening. And Sergey sitting in his office has to trouble about orders for next day, next week to earn his money for wife and children. That’s why we supply any quantity you need. If you need 1 titanium tube, 1 titanium bar, 1 titanium plate or part of titanium wire titanium plant will release. Besides we’ll release for experiment free or at prime cost for invalid wheelchair manufacturing of titanium all you request: titanium bar, titanium tube, titanium sheet, titanium plate and titanium wire.

Director of Kiev titanium plant Viktor Nikolayevich Fedorov and Konstantin agreed: if it manages to launch into production invalid wheelchairs, our plant FIKO will constantly supply wheelchairs made of titanium.

Willingness to help people or people with special needs as they in Ukraine is noble impulse. But only impulse is not enough. Accepting State Budget Ukrainian deputies must provide allocation of state orders in Ukrainian enterprises or reducing taxes for enterprises manufacturing wheelchairs, crutches etc.

Not only invalids need good wheelchairs and crutches but also people of middle age. They also want to listen to bird singing moving on high-quality wheelchair in the park.

 

   

  HOMEManufactureProductsTechnical infoNewsGaleryContakt us